Help, Contact & FAQ
Shop - PCBs
(search for shop items within this category)
Battery Pack Cell Balancer PCB 
PCB for the Battery Pack Cell Balancer.
Double-sided PCB with plated through holes, solder mask and silkscreen overlay.
69 x 35.5mm.
Note: for correct operation please replace D5 with a 0805 zero ohm jumper.
Cat No SC3347. Price: AUD $6.00
Add to trolley
yes (13 available). Estimated dispatch time: 1-3 days
Project: Battery-Pack Cell Balancer For Optimum Charging
Other items relevant for this project:
PIC16LF1709-I/SO programmed for the Battery Pack Cell Balancer [1111115A.HEX]
Firmware (HEX) file and C source code for the Battery Pack Cell Balancer [1111115A.HEX]
Battery Pack Cell Balancer PCB pattern (PDF download) 
Subscribers receive a discount on this item. Move the pointer over the price for details.
If you are subscriber, log in to apply your discounts. Otherwise, you may subscribe at the same time as you purchase this item to get the discount.
This discount is not cumulative with any other discounts, including volume discounts.