 |
New RGB LED 'Analog' Clock kit
This kit contains everything needed to build the new WS2812B-based RGB LED Clock. All you need to provide is a power supply.
The PCB comes mostly pre-assembled, with just a few components to add.
By default, it uses NTP time derived from a Wi-Fi network. If you want to use a GPS module as the time source, you can order that separately and add it (see the options below).
See the link immediately below for a full list of parts included in the kit.
| Cat No SC7752. Price: AUD $85.00 1 |
Log in to purchase |
In stock:  yes (5 available). Estimated dispatch time: 3-10 days | | Related to: Project: NeoPixel RGB LED Analog Clock, Part 1 (November 2026 [print issue] [online issue]) |
Other items relevant to this project: |
Kit parts list | 1 × WS2812B Clock assembled board |
| 1 × Raspberry Pi Pico W |
Connectors | 1 × 40-pin male low-profile header (2.54mm pitch) |
| 1 × 2-way right-angle polarised header with matching plug & pins |
Semiconductors | 1 × AP5002SG buck regulator (SOIC-8) |
Through-hole Resistors | 1 × GL5528 20kΩ/1MΩ 5mm LDR |
Cable & Hardware | 1 × 20cm length of Tinned copper wire, 0.7-1.0mm diameter |
|
|
