Kits / Part Sets - Silicon Chip Shop

Silicon Chip Shop - Kits / Part Sets (search for shop items within this category)

Semiconductor Analyser kit

This kit for the Semiconductor Analyser includes everything needed to build it except the case and battery. You can order the case from us as a separate item.

The PCB comes with most of the parts already soldered to it - all the top-side components are soldered. That means just a handful of items need to be soldered to the back before the wiring can be done and it's ready for testing.

The microcontroller on the board is already programmed but you can easily reprogram it using a USB cable (see the article for instructions).

The photo shows the assembled board with the test leads soldered to it and the optional programming header fitted (not required and not included in the kit).

See the link immediately below for a complete list of parts in the kit.

Cat No SC7725. Price: AUD $95.00 ¹

In stock:

yes (41 available). Estimated dispatch time: 1-3 days

Related to: Project: Semiconductor Analyser (September 2026 [print issue] [online issue])

Other items relevant to this project:

Kit parts list

	1 × Assembled Semiconductor Analyser board
	1 × 2.4-inch TFT LCD screen with 18-wire flex cable (no touch)
	1 × magnetic buzzer miscellaneous (CMT-0525-75-SMT-TR)
	2 × E-Switch TL3301PF160QG

Semiconductors

1 × 3mm yellow diffused LED

Cable & Hardware

	1 × Double-sided foam-core tape pad, 40 × 40 × 3.0mm
	1 × Red, green & blue test clips with attached wires
	4 × Small adhesive rubber foot
	4 × M3 × 6mm blackened metal panhead self-tapping screw

Subscribers receive a discount on this item. Move the pointer over the price for details.
If you are subscriber, log in to apply your discounts. Otherwise, you may subscribe at the same time as you purchase this item to get the discount.
This discount is not cumulative with any other discounts, including volume discounts.