Kits / Part Sets - Silicon Chip Shop

Silicon Chip Shop - Kits / Part Sets (search for shop items within this category)

Simple LC Meter complete kit

This kit contains pretty all the parts needed to build the Simple LC Meter, including the 3D-printed case, programmed microcontroller, PCB, wire and alligator clips.

All you need to add is a USB supply and USB-A to USB-C cable to power it.

See the link immediately below for a complete list of parts in the kit.

The first batch of kits is expected to be ready by around Friday 24th of April.

Cat No SC7657. Price: AUD $45.00 ¹

In stock:

no. Estimated dispatch time: approximately 1 week

Related to: Project: Simple LC Meter (May 2026 [print issue])

Other items relevant to this project:

Simple LC Meter PCB [04103261] ($2.50)
ATtiny85-20PU programmed for the Simple LC Meter [0410326A.HEX/.EEP] ($10.00)
0.91-inch white OLED with 4-pin I²C interface ($7.50)
Firmware for the Simple LC Meter (Free)
Simple LC Meter PCB pattern (PDF download) [04103261] (Free)

Kit parts list

	1 × 3D-printed button extender for the Simple LC Meter
	1 × 3D-printed case for the Simple LC Meter (white)
	1 × SS22H02-G5 5mm miniature PCB-mounting vertical DPDT slide switch
	1 × 100µH axial inductor
	1 × 8MHz crystal (low-profile HC-49)
	1 × 4-pin tactile switch, black 6×6mm, 6mm actuator
	1 × Simple LC Meter PCB [04103261]
	1 × 0.91-inch white OLED with 4-pin I²C interface

Connectors

	1 × DIP-8 socket (machined pins)
	1 × 2-pin RA USB-C socket
	1 × 4-pin low-profile machined socket strip (2.54mm pitch)
	1 × 4-pin low-profile machined pin header (2.54mm pitch)

Semiconductors

	1 × ATtiny85-20PU programmed for the Simple LC Meter [0410326A.HEX/.EEP]
	1 × 74HC04D hex inverter IC (SOIC-14)

Through-hole Capacitors

1 × 1nF ±5% 50V radial polystyrene

SMD Capacitors

	1 × 1µF 50V M2012/0805 X7R
	1 × 100nF 50V M2012/0805 X7R
	2 × 4.7pF 50V M2012/0805 C0G/NP0

SMD Resistors

	1 × 1MΩ ±1% M2012/0805 ⅛W
	1 × 100kΩ ±1% M2012/0805 ⅛W
	1 × 22kΩ ±1% M2012/0805 ⅛W
	1 × 5.6kΩ ±1% M2012/0805 ⅛W

Cable & Hardware

	1 × 10cm length of light-duty black hookup wire
	1 × 10cm length of light-duty red hookup wire
	2 × 5mm metal countersunk M2 screw
	1 × Red & black pair alligator clips

Subscribers receive a discount on this item. Move the pointer over the price for details.
If you are subscriber, log in to apply your discounts. Otherwise, you may subscribe at the same time as you purchase this item to get the discount.
This discount is not cumulative with any other discounts, including volume discounts.