Kits / Part Sets - Silicon Chip Shop

Silicon Chip Shop - Kits / Part Sets (search for shop items within this category)

Mic the Mouse complete kit

A set of parts to build the Mic the Mouse project. It includes everything you need except solder and glue - see the link immediately below for a full list of parts included.

Note: the photo shows the assembled kit.

Cat No SC7508. Price: AUD $37.50 ¹

Add to trolley

In stock:

yes (38 available). Estimated dispatch time: 1-3 days

Related to: Project: Mic the Mouse (August 2025 [print issue])

Other items relevant to this project:

Kit parts list

	1 × Mic the Mouse PCB [08105251]
	1 × Mic the Mouse stand [08105252]
	1 × 1-30V 30×5.5mm Wired Piezo Transducer (HYR-3006/AT3040)
	1 × 4-pin 6.2×6.5mm tactile switch, red actuator (SKHMQME010)
	1 × SIL SPDT mini vertical slide switch (SS12D00G3)
	1 × DFRobot SEN0487 3-pin MEMS microphone module

Connectors

1 × CR2032 coin cell holder

Semiconductors

	1 × PIC16F15214-I/SN programmed for Mic the Mouse [1810525A.HEX]
	1 × 3mm red diffused LED
	1 × 1N4148WS 75V 200mA fast switching diode (SOD-323)

SMD Capacitors

	1 × 1µF 50V M3216/1206 X7R
	1 × 100nF 50V M2012/0805 X7R

SMD Resistors

	1 × 10kΩ ±1% M2012/0805 ⅛W
	2 × 1kΩ ±1% M2012/0805 ⅛W
	1 × 100Ω ±1% M2012/0805 ⅛W

Cable & Hardware

	5 × 10mm nylon countersunk head M3 screw
	1 × 26cm length of 0.8mm diameter bamboo cord
	1 × 6mm Nylon M3 spacer
	6 × Nylon M3 hex nut

Subscribers receive a discount on this item. Move the pointer over the price for details.
If you are subscriber, log in to apply your discounts. Otherwise, you may subscribe at the same time as you purchase this item to get the discount.
This discount is not cumulative with any other discounts, including volume discounts.