Kits / Part Sets - Silicon Chip Shop

Silicon Chip Shop - Kits / Part Sets (search for shop items within this category)

Short-form kit for the Compact OLED Clock & Timer

This kit for the Compact OLED Clock/Timer includes everything you need to build it except the Jiffy box and the Li-ion cell. See the articles for information on where to source those parts.

Click the link immediately below for a full list of what's included in the kit.

Cat No SC6979. Price: AUD $45.00 ¹

Add to trolley

In stock:

yes (19 available). Estimated dispatch time: 1-3 days

Related to: Project: Compact OLED Clock/Timer (September 2024 [print issue] [online issue])

Other items relevant to this project:

Kit parts list

	4 × 4-pin 6.2×6.2mm tactile switch, reverse-mounting (Adafruit 5410)
	1 × Passive Piezo Buzzer (TDK PS1240)
	1 × 32768Hz crystal (watch style)
	1 × Compact OLED Clock & Timer PCB [19101231]
	1 × Raspberry Pi Pico W
	1 × 1.3-inch blue OLED with 4-pin I²C interface

Connectors

	1 × Mini-USB connector
	1 × 14-pin male header (2.54mm pitch)

Semiconductors

	1 × PIC16F18146-I/SO programmed for the Compact OLED Clock & Timer [1910123A.HEX]
	1 × 3mm red/green bicolour diffused LED (two-lead)
	1 × MCP73831T-2ACI/OT Li-ion charger IC (SOT-23-5)
	1 × SS34 [SMD 1N5822 equivalent] 40V 3A schottky diode (DO-214AB)

Through-hole Resistors

1 × GL5549 100-200kΩ/10MΩ 5mm LDR

SMD Capacitors

	2 × 10µF 25V M3216/1206 X7R
	2 × 100nF 50V M3216/1206 X7R
	2 × 4.7pF 50V M2012/0805 C0G/NP0

SMD Resistors

	1 × 1MΩ ±1% M3216/1206 ¼W
	3 × 10kΩ ±1% M3216/1206 ¼W
	2 × 1kΩ ±1% M3216/1206 ¼W

Cable & Hardware

	4 × Small adhesive rubber foot
	1 × 1 × AA battery holder (flying leads)

Subscribers receive a discount on this item. Move the pointer over the price for details.
If you are subscriber, log in to apply your discounts. Otherwise, you may subscribe at the same time as you purchase this item to get the discount.
This discount is not cumulative with any other discounts, including volume discounts.