 |
SMD parts for the Arduino-based USB Electrocardiogram
All the SMD parts required to build the Arduino USB ECG.
Pack includes:
- 1 x AD623ARZ low-voltage instrumentation amplifier (SOIC-8)
- 1 x NE5532D dual low-noise operation amplifier (SOIC-8)
- 2 x 1N5711W7F Schottky diodes (SOD-123)
- 1 x 100µH 12 x 12mm SMD shielded inductor (L1)
- 4 x 100µF 6.3V X5R SMD capacitors (3216/1206)
- 1 x 10µF 6.3V X5R SMD capacitor (3216/1206)
- 1 x 6.8µF 16V X7R SMD capacitor (3216/1206)
- 2 x 1µF 16V X7R SMD capacitors (3216/1206)
- 3 x 100nF 16V X7R SMD capacitors (3216/1206)
- 1 x 47nF 50V X7R SMD capacitor (3216/1206)
- 2 x 1nF ±1% 50V C0G SMD capacitors (3216/1206)
- 2 x 2.2MΩ ±1% SMD resistors (3216/1206)
- 2 x 20kΩ ±1% SMD resistors (3216/1206)
- 1 x 11kΩ ±1% SMD resistor (3216/1206)
- 1 x 10kΩ ±1% SMD resistor (3216/1206)
- 2 x 4.7kΩ ±0.1% SMD resistors (3216/1206)
- 2 x 3kΩ ±1% SMD resistors (3216/1206)
- 1 x 2.7kΩ ±1% SMD resistor (3216/1206)
- 1 x 2.2kΩ ±1% SMD resistor (3216/1206)
- 1 x 1.2kΩ ±1% SMD resistor (3216/1206)
- 2 x 470Ω ±1% SMD resistors (3216/1206)
- 1 x 100Ω ±1% SMD resistor (3216/1206)
- 1 x 82Ω ±1% SMD resistor (3216/1206)
PCB is available separately. Note that the through-hole components must be purchased separately (eg, from Jaycar and/or Altronics).
|