Silicon ChipOuter Back Cover - November 2020 SILICON CHIP
  1. Outer Front Cover
  2. Contents
  3. Publisher's Letter: Why is electronics male-dominated?
  4. Feature: MEMS (Micro-Electromechanical Systems) by Dr David Maddison
  5. Project: Eight Small LED Christmas Ornaments by Tim Blythman
  6. PartShop
  7. Project: Two Large LED Christmas Stars by Barry Cullen & Tim Blythman
  8. Project: Balanced Input Attenuator for the USB SuperCodec by Phil Prosser
  9. Serviceman's Log: One repair leads to another by Dave Thompson
  10. Vintage Radio: RCA BP-10 "miniature" valve portable radio by Ian Batty
  11. Feature: A Rundown on New 8-pin PIC Microcontrollers by Tim Blythman
  12. Feature: The Vintage Matrox ALT-512 Graphics Card by Hugo Holden
  13. Project: Flexible Digital Lighting Controller, part 2 by Tim Blythman
  14. Feature: Electronic ‘Wearables’ and the Jaycar Sparkle Stitch by Tim Blythman & Nicholas Vinen
  15. Market Centre
  16. Advertising Index
  17. Notes & Errata: USB SuperCodec, August-October 2020; History of the Australian GPO, September 2020; Shirt Pocket Oscillator, September 2020; Frequency Reference Signal Distributor, April 2020; 45V 8A Linear Bench Supply, October-December 2019
  18. Outer Back Cover

This is only a preview of the November 2020 issue of Silicon Chip.

You can view 44 of the 112 pages in the full issue, including the advertisments.

For full access, purchase the issue for $10.00 or subscribe for access to the latest issues.

Items relevant to "Eight Small LED Christmas Ornaments":
  • Tiny LED Cap PCB [16111193] (AUD $3.00)
  • Tiny LED Stocking PCB [16111194] (AUD $3.00)
  • Tiny LED Reindeer PCB [16111195] (AUD $3.00)
  • Tiny LED Bauble PCB [16111196] (AUD $3.00)
  • Tiny LED Sleigh PCB [16111197] (AUD $3.00)
  • Tiny LED Star PCB [16111198] (AUD $3.00)
  • Tiny LED Candy Cane PCB [16111199] (AUD $3.00)
  • PIC12F1572-I/SN (or equivalent) programmed for the Tiny LED Christmas Ornaments (Programmed Microcontroller, AUD $10.00)
  • Tiny LED Christmas Ornament complete kit (Component, AUD $15.00)
  • Firmware for the LED Christmas Ornaments (Software, Free)
  • Eight Tiny LED Xmas Ornament PCB patterns (PDF download) [16111191-16111199] (Free)
Articles in this series:
  • Eight Small LED Christmas Ornaments (November 2020)
  • Eight Small LED Christmas Ornaments (November 2020)
  • Christmas LED Icicle Decoration (November 2022)
  • Christmas LED Icicle Decoration (November 2022)
Items relevant to "Two Large LED Christmas Stars":
  • Stackable LED Star PCB [16109201] (AUD $12.50)
  • RGB Stackable LED Star PCB [16109202] (AUD $15.00)
  • ATmega328P-AUR or ATmega88PB-AUR programmed for the RGB Stackable LED Star [1620920A.HEX or 1620920B.HEX] (Programmed Microcontroller, AUD $10.00)
  • Kit for the RGB Stackable LED Christmas Star (Component, AUD $40.00)
  • Firmware for the 30 RGB LED Xmas Star (Software, Free)
  • RGB Stackable LED Star PCB pattern (PDF download) [16209202] (Free)
  • Stackable LED Star PCB pattern (PDF download) [16109201] (Free)
Items relevant to "Balanced Input Attenuator for the USB SuperCodec":
  • USB SuperCodec PCB [01106201] (AUD $12.50)
  • USB SuperCodec Balanced Input Attenuator add-on PCB [01106202] (AUD $7.50)
  • Parts source grid for the USB SuperCodec (Software, Free)
  • USB SuperCodec PCB pattern (PDF download) [01106201] (Free)
  • USB SuperCodec Balanced Input Attenuator add-on PCB pattern (PDF download) [01106202] (Free)
  • USB SuperCodec front panel artwork (PDF download) (Free)
  • Drilling and cutting diagrams for the USB SuperCodec Balanced Input Attenuator (PDF download) (Panel Artwork, Free)
Articles in this series:
  • USB SuperCodec (August 2020)
  • USB SuperCodec (August 2020)
  • USB SuperCodec – part two (September 2020)
  • USB SuperCodec – part two (September 2020)
  • USB SuperCodec – part three (October 2020)
  • USB SuperCodec – part three (October 2020)
  • Balanced Input Attenuator for the USB SuperCodec (November 2020)
  • Balanced Input Attenuator for the USB SuperCodec (November 2020)
  • Balanced Input Attenuator for the USB SuperCodec, Part 2 (December 2020)
  • Balanced Input Attenuator for the USB SuperCodec, Part 2 (December 2020)
Articles in this series:
  • The Matrox ALT-256 Graphics Card (October 2020)
  • The Matrox ALT-256 Graphics Card (October 2020)
  • The Vintage Matrox ALT-512 Graphics Card (November 2020)
  • The Vintage Matrox ALT-512 Graphics Card (November 2020)
Items relevant to "Flexible Digital Lighting Controller, part 2":
  • Flexible Digital Lighting Controller main PCB [16110202] (AUD $20.00)
  • Flexible Digital Lighting Controller Micromite Master PCB [16110201] (AUD $5.00)
  • Flexible Digital Lighting Controller CP2102 Adaptor PCB [16110204] (AUD $2.50)
  • Flexible Digital Lighting Controller LED slave PCB [16110205] (AUD $5.00)
  • PIC16F1705-I/P programmed for the Flexible Digital Lighting Controller [1611020A.HEX] (Programmed Microcontroller, AUD $10.00)
  • PIC32MX170F256B-50I/SP programmed for the Flexible Digital Lighting Controller Micromite master [1611020B.hex] (Programmed Microcontroller, AUD $15.00)
  • PIC16F1455-I/P programmed for the Flexible Digital Lighting Controller WS2812 Slave [16110205.HEX] (Programmed Microcontroller, AUD $10.00)
  • Si8751AB 2.5kV isolated Mosfet driver with integral power supply (Component, AUD $10.00)
  • Micromite LCD BackPack V3 complete kit (Component, AUD $75.00)
  • Hard-to-get parts for the Flexible Digital Lighting Controller (Component, AUD $100.00)
  • Flexible Digital Lighting Controller front panel PCB [16110203] (AUD $20.00)
  • Firmware and software for the Fiexible Digital Lighting Controller (Free)
  • Firmware and PC software for the Digital Lighting Controller [1611010A.HEX] (Free)
  • Flexible Digital Lighting Controller mains slave PCB patterns (PDF download) [16110202-3] (Free)
  • Flexible Digital Lighting Controller Master PCB patterns (PDF download) [16110201, 16110204] (Free)
  • Flexible Digital Lighting Controller LED slave PCB pattern (PDF download) [16110205] (Free)
  • Drilling and cutting diagrams for the Flexible Digital Lighting Controller Micromite master (PDF download) (Panel Artwork, Free)
  • Cutting diagram for the Flexible Digital Lighting Controller mains slave rear panel (PDF download) (Panel Artwork, Free)
  • Cutting diagrams and front panel artwork for the Flexible Digital Lighting Controller LED slave (PDF download) (Free)
  • Matte/Gloss Black UB3 Lid for Micromite LCD BackPack V3 or Pico BackPack using 3.5in screen (PCB, AUD $5.00)
Articles in this series:
  • Flexible Digital Lighting Controller, part 1 (October 2020)
  • Flexible Digital Lighting Controller, part 1 (October 2020)
  • Flexible Digital Lighting Controller, part 2 (November 2020)
  • Flexible Digital Lighting Controller, part 2 (November 2020)
  • Flexible Digital Lighting Controller, part 3 (December 2020)
  • Flexible Digital Lighting Controller, part 3 (December 2020)
  • Digital Lighting Controller Translator (December 2021)
  • Digital Lighting Controller Translator (December 2021)

Purchase a printed copy of this issue for $10.00.