Silicon ChipOuter Front Cover - April 2018 SILICON CHIP
  1. Outer Front Cover
  2. Contents
  3. Publisher's Letter: New blood at Silicon Chip
  4. Project: 230VAC Thermopile-based Heater Controller by John Clarke
  5. Subscriptions
  6. Project: Low cost, Arduino-based 3-Axis Seismograph by Tim Blythman and Nicholas Vinen
  7. Review: Rohde & Schwarz RTM3004 by Nicholas Vinen
  8. Serviceman's Log: Why can't I program MY alarm? by Dave Thompson
  9. Project: The Clayton’s “GPS” time signal generator by Tim Blythman
  10. Review: New “Facett” hearing aids from BlameySaunders by Ross Tester
  11. Feature: El Cheapo Modules 15: ESP8266-based WiFi module by Jim Rowe
  12. Vintage Radio: 1962 Astor M2 Cry-baby: radio, intercom and baby monitor in one by Ian Batty
  13. PartShop
  14. Market Centre
  15. Advertising Index
  16. Notes & Errata: Full Wave 10A Motor Speed Controller / Budget Senator Loudspeakers / Making Power From Rubbish
  17. Outer Back Cover: Hare & Forbes Machineryhouse

This is only a preview of the April 2018 issue of Silicon Chip.

You can view 47 of the 96 pages in the full issue, including the advertisments.

For full access, purchase the issue for $10.00 or subscribe for access to the latest issues.

Items relevant to "230VAC Thermopile-based Heater Controller":
  • Thermopile-based Heater Controller PCB [10104181] (AUD $10.00)
  • PIC12F675-I/P programmed for the Thermopile-based Heater Controller [1010418A.hex] (Programmed Microcontroller, AUD $10.00)
  • Firmware (HEX AND ASM) files for the Infrared Sensing Heater Controller [1010418A.HEX] (Software, Free)
  • Thermopile-based Heater Controller PCB pattern (PDF download) [10104181] (Free)
  • Thermopile-based Heater Controller lid panel artwork (PDF download) (Free)
Items relevant to "Low cost, Arduino-based 3-Axis Seismograph":
  • Arduino Sketch (.ino) and libraries for the 3-Axis Arduino-based Seismograph (Software, Free)
Articles in this series:
  • Low cost, Arduino-based 3-Axis Seismograph (April 2018)
  • Low cost, Arduino-based 3-Axis Seismograph (April 2018)
  • Arduino Seismograph revisited – improving sensitivity (April 2019)
  • Arduino Seismograph revisited – improving sensitivity (April 2019)
Items relevant to "The Clayton’s “GPS” time signal generator":
  • ESP-01 WiFi module (with ESP8266 IC) (Component, AUD $5.00)
  • CP2102-based USB/TTL serial converter with 5-pin header and 30cm jumper cable (Component, AUD $5.00)
  • Arduino Sketch (.ino) file for the Clayton's GPS Time Signal Generator (Software, Free)
Items relevant to "El Cheapo Modules 15: ESP8266-based WiFi module":
  • ESP-01 WiFi module (with ESP8266 IC) (Component, AUD $5.00)
  • Software for El Cheapo Modules: ESP-01 (Free)

Purchase a printed copy of this issue for $10.00.