Silicon ChipOuter Front Cover - September 2015 SILICON CHIP
  1. Outer Front Cover
  2. Contents
  3. Publisher's Letter: SMDs present challenges and opportunities
  4. Feature: Autonomous Underwater Vehicles by Dr David Maddison
  5. Review: 4K Monitor Shoot-Out by Leo Simpson & Nicholas Vinen
  6. Project: Senator: 10-Inch Bass Reflex Loudspeakers by Design by Allan Linton-Smith, words by Leo Simpson
  7. Feature: Electronex: The Electronics Design & Assembly Expo by Silicon Chip
  8. Product Showcase
  9. Project: USB Charger Regulator With Low-Battery Cut-Out by Nicholas Vinen
  10. Project: Build A 9-Channel Infrared Remote Control by John Clarke
  11. Project: Ultra-LD Mk.4 200W RMS Power Amplifier, Pt.2 by Nicholas Vinen
  12. PartShop
  13. Vintage Radio: The unique GE 675 5-transistor radio by Ian Batty
  14. Subscriptions
  15. Market Centre
  16. Advertising Index
  17. Notes & Errata
  18. Outer Back Cover

This is only a preview of the September 2015 issue of Silicon Chip.

You can view 44 of the 112 pages in the full issue, including the advertisments.

For full access, purchase the issue for $10.00 or subscribe for access to the latest issues.

Items relevant to "Senator: 10-Inch Bass Reflex Loudspeakers":
  • 2-Way Passive Crossover PCB [01205141] (AUD $20.00)
  • Acrylic pieces to make two inductor bobbins (Component, AUD $7.50)
  • 2-Way Passive Loudspeaker Crossover PCB pattern (PDF download) [01205141] (Free)
Articles in this series:
  • Senator: 10-Inch Bass Reflex Loudspeakers (September 2015)
  • Senator: 10-Inch Bass Reflex Loudspeakers (September 2015)
  • 2-Way Crossover For Senator 10-Inch Loudspeakers (October 2015)
  • 2-Way Crossover For Senator 10-Inch Loudspeakers (October 2015)
Items relevant to "USB Charger Regulator With Low-Battery Cut-Out":
  • Mini 12V USB Power Supply with Low-Battery Cut-out PCB [18107151/18107152] (AUD $2.50)
  • SMD parts for the Mini 12V USB Regulator with Low-Battery Cut-out (Component, AUD $20.00)
  • Mini 12V USB Power Supply with Low-Battery Cut-out PCB pattern (PDF download) [18107152] (Free)
Articles in this series:
  • Install USB Charging Points In Your Car (July 2015)
  • Install USB Charging Points In Your Car (July 2015)
  • USB Charger Regulator With Low-Battery Cut-Out (September 2015)
  • USB Charger Regulator With Low-Battery Cut-Out (September 2015)
Items relevant to "Build A 9-Channel Infrared Remote Control":
  • 9-Channel Infrared Remote Control PCB [15108151] (AUD $15.00)
  • PIC16F88-I/P programmed for the 9-Channel Infrared Remote Control [1510815B.HEX] (Programmed Microcontroller, AUD $15.00)
  • Firmware (HEX) files and source code for the 9-Channel Infrared Remote Control [1510815B.HEX] (Software, Free)
  • 9-Channel Infrared Remote Control PCB pattern (PDF download) [15108151] (Free)
  • 9-Channel Infrared Remote Control Receiver panel artwork (PDF download) (Free)
Items relevant to "Ultra-LD Mk.4 200W RMS Power Amplifier, Pt.2":
  • Ultra-LD Mk.4 Amplifier PCB [01107151 RevC] (AUD $15.00)
  • Ultra-LD Mk3/Mk4 Amplifier Power Supply PCB [01109111] (AUD $15.00)
  • Ultra-LD Mk.4 Amplifier prototype PCB [01107151 RevB] (AUD $2.50)
  • 2 x HN3A51F + 1 x IMX8-7-F + 2 x BC846C transistors for the Ultra-LD Mk.4 Power Amplifier module (Component, AUD $5.00)
  • SA156 plastic bobbin (Component, AUD $1.00)
  • Ultra-LD Mk.3 Power Supply PCB pattern (PDF download) [01109111] (Free)
  • Ultra-LD Mk.4 Amplifier PCB pattern (PDF download) [01107151 RevC] (Free)
Articles in this series:
  • Ultra-LD Mk.4 200W RMS Power Amplifier: Preview (July 2015)
  • Ultra-LD Mk.4 200W RMS Power Amplifier: Preview (July 2015)
  • Ultra-LD Mk.4 200W RMS Power Amplifier, Pt.1 (August 2015)
  • Ultra-LD Mk.4 200W RMS Power Amplifier, Pt.1 (August 2015)
  • Ultra-LD Mk.4 200W RMS Power Amplifier, Pt.2 (September 2015)
  • Ultra-LD Mk.4 200W RMS Power Amplifier, Pt.2 (September 2015)
  • Ultra-LD Mk.4 Power Amplifier, Pt.3: 110W Version (October 2015)
  • Ultra-LD Mk.4 Power Amplifier, Pt.3: 110W Version (October 2015)

Purchase a printed copy of this issue for $10.00.