
____________________________________
Inductance & Q-factor Meter Firmware


_____________________
Version 1.0  11/01/05

Initial release, as described in Silicon Chip magazine, February & March 2005.


_____________________
Version 1.1  23/11/05

This update incorporates two major changes from the initial release, which are:

1) the meter now reads up to 10mH as originally described, and
2) the meter indicates when both L and Q values are out of bounds (indicated by the letter "E" on the display).

In addition, to improve meter performance when measuring certain combinations of L & Q, install two pairs of series diodes in parallel with the test terminals, as shown in the "Notes & Errata" section of Silicon Chip, published in January 2006.

______________________________________________________
Copyright (C) 2005, 2006 Silicon Chip Publications P/L
All rights reserved
www.siliconchip.com.au
