|
Currawong 2 x 10W Stereo Valve Amplifier top cover cutting diagram
Cutting details for the top cover of the Currawong Stereo Valve Amplifier.
Each file contains the paths to cut to make a top cover and can be fed to a laser cutter.
The overall dimensions are 289.56 x 285.75mm and you should check this before proceeding with cutting as there can sometimes be scaling issues when importing these files.
|
|
Firmware and source code for the Currawong Remote Volume Control [0111114A.HEX]
PIC16F88 microcontroller firmware (HEX file) plus ASM source code for the remote control unit to suit the Currawong 2 x 10W Stereo Valve Amplifier.
|
|
Currawong 2 x 10W Stereo Valve Amplifier main PCB [01111141]
Main PCB for the Currawong Valve Amplifier.
2mm thick, double-sided PCB with plated through holes and plated/unplated slots, solder mask and silkscreen overlay.
272 x 255mm.
|
|
Currawong Remote Control PCB [01111144]
PCB for the Currawong Stereo Valve Amplifier remote control option.
Double-sided PCB with plated through holes, solder mask and silkscreen overlay.
50 x 50mm.
|
|
PIC16F88-I/P programmed for the Currawong Remote Volume Control [0111114A.HEX]
A PIC16F88-I/P 8-bit microcontroller programmed with the firmware for the remote control module in the Currawong 2 x 10W Stereo Valve Amplifier (0111114A.HEX).
|
|
Currawong 2 x 10W Stereo Valve Amplifier main PCB pattern [01111141]
PDF with the PCB design for the Currawong Stereo Valve Amplifier (double-sided).
Both main board layers are in a single PDF, on separate pages. The remote control board pattern is also provided as a separate file.
Note that this would be virtually impossible to etch yourself, it's provided mainly as a reference.
|
|
Currawong 2 x 10W Stereo Valve Amplifier panel artwork (PDF download)
PDF with artwork for the front and rear panels of the Currawong Stereo Valve Amplifier.
We can supply these panels pre-cut and printed; see the PCBs & Panels section of the Shop.
|
|
Front & rear panels for the Currawong 2 x 10W Stereo Valve Amplifier [01111142/3]
Front and rear panels for the Currawong Stereo Valve Amplifier.
Each panel is made from a 1.6mm-thick PCB with black solder mask and white silkscreen printing. All holes and cut-outs are pre-made and the corners are rounded.
The front panel is 249 x 30mm and coded 01111142. The rear panel is 249 x 53.5mm and coded 0111143. Sold as a pair.
|
|
Currawong 2 x 10W Stereo Valve Amplifier acrylic top cover
3mm thick clear acrylic top cover for the Currawong. Thirteen separate pieces are provided, all accurately laser cut:
- Top cover with holes for valves, output transformers, vents and mounting
- Front cover panel which glues into slots on the top cover
- Transformer shield pieces which also glue into slots on the top cover
- Seven 3mm cylindrical spacers for mounting
290 x 286mm total size.
|
|
Hard-to-get parts for the Currawong stereo valve amplifier
A small subset of the parts for the Currawong which are not available locally or are difficult to source. See the parts list link below for details on what is included.
The rest of the parts should be available from Jaycar and Altronics.
** The 9.1kΩ resistors were not originally included in the kit since 8.2kΩ can be used instead but we have decided to include them to offer constructors the choice.
|