|Pair of CSD18534KCS logic-level Mosfets|
Pack of two CSD18534KCS N-channel logic level Mosfets. These replace the IPP230N06L3 which are now obsolete.
They are suitable replacements for the STP30NE06L and RFP30N06LE Mosfets specified in a number of our projects. The main difference is that these ones have much faster switching.
They can be used with the Ultrasonic Anti-Fouling and Barking Dog Blaster units. The critical parameters are:
Breakdown voltage: 60V
Maximum DC current: 73A
Peak current: 164A
Power dissipation: 107W
Maximum on-resistance: 7.6mΩ @ 10V, 10.2mΩ @ 4.5V
Maximum gate voltage: ±20V
Input capacitance: 1500pF
Gate charge: 9.3nC
Turn-on delay/rise time: 4.2ns/4.8ns
Turn-off delay/fall time: 10.4ns/2.4ns
These are also suitable for use in the 40V 5A Hybrid Switchmode/Linear Bench supply project.
|40V/5A Hybrid Switchmode/Linear Bench Supply PCB |
PCB for the 100W Hybrid Bench Supply.
Double-sided PCB with plated through holes, solder mask and silkscreen overlay.
198 x 95mm.
|40V/5A Hybrid Switchmode/Linear Bench Supply PCB pattern (PDF download) |
PDF with the PCB design for the Hybrid Linear/Switchmode 40V 5A Bench Supply (double-sided).
Both layers are in a single PDF. Note that due to the number and size of vias it would be very difficult to etch this board yourself.
|40V/5A Hybrid Switchmode/Linear Bench Supply panel artwork (PDF download)|
Front and rear panel artwork for the Hybrid Switchmode/Linear Bench Supply.
|SMD parts for the 40V/5A Hybrid Switchmode/Linear Bench Supply|
All the SMD parts for the Hybrid Bench Supply plus a couple of extra parts.
1 LM5118MH buck/boost switchmode controller IC (HTSSOP-20)
1 SCIHP1367-100M 10µH 15.5A 5MHz shielded inductor
2 RLB1314-3R3ML 3.3µH 5.6A bobbin inductors
2 BUK9Y6R0-60E or PSMN4R0-60YS 60V SMD Mosfets (SOT-669)
3 BCM856DS dual PNP SMD transistors (SOT-457/SC-74)
2 SK1545 45A 15A SMD schottky diodes
10 10µF 25V X5R SMD ceramic capacitors, 3216 (imperial 1206) size
10 4.7µF 50V X5R SMD ceramic capacitors, 3216 (imperial 1206) size
1 1µF, 4 100nF, 1 10nF, 1 4.7nF & 1 2.2nF 50V X5R SMD ceramic capacitors, 2012 (imperial 0805) size
1 330pF 50V C0G/NP0 SMD ceramic capacitor, 2012 (imperial 0805) size
1 82kΩ, 1 15kΩ, 2 10kΩ & 1 10Ω 1% SMD resistors, 2012 (imperial 0805) size
1 0.1Ω 1% 3W SMD resistor, 6432 (imperial 2512) size
1 15mΩ 1% ¾W SMD resistor, 3216 (imperial 1206) size
We sell the PCB separately.