|
Pair of CSD18534KCS logic-level Mosfets
Pack of two CSD18534KCS N-channel logic level Mosfets. These replace the IPP230N06L3 which are now obsolete.
They are suitable replacements for the STP30NE06L and RFP30N06LE Mosfets specified in a number of our projects. The main difference is that these ones have much faster switching.
They can be used with the Ultrasonic Anti-Fouling and Barking Dog Blaster units. The critical parameters are:
Breakdown voltage: 60V
Maximum DC current: 73A
Peak current: 164A
Power dissipation: 107W
Maximum on-resistance: 7.6mΩ @ 10V, 10.2mΩ @ 4.5V
Maximum gate voltage: ±20V
Input capacitance: 1500pF
Gate charge: 9.3nC
Turn-on delay/rise time: 4.2ns/4.8ns
Turn-off delay/fall time: 10.4ns/2.4ns
These are also suitable for use in the 40V 5A Hybrid Switchmode/Linear Bench supply project.
|
|
ETD29 transformer components
A set of parts needed to build an ETD29-based transformer (excluding winding wire and insulation). The set contains:
- 1 x 13-pin former (B66359W1013T001)
- 2 x iron cores (B66358G0000X187)
- 2 x clips (B66359S2000X000)
This set is suitable for building a variety of projects - see below.
|
|
Barking Dog Blaster panel artwork (PDF download)
PDF with the lid/panel designs for the Barking Dog Blaster project.
One file has the original panel for the small box, the second file also contains the larger panel which may be required if you're adding a remote control to it, as described in the October 2012 issue.
|