|
Software for the Arduno DCC Controller
Arduino source code and required libraries for the DCC Controller from January 2020.
|
|
DCC Power Shield PCB [09207181]
Double-sided PCB for the shield used in the Arduino DCC Base Station/Booster, with plated through holes, solder mask and silkscreen overlay.
68.5 x 53.5mm.
|
|
DCC Decoder Programmer PCB [09107181]
The PCB for the DCC Programmer project. Can also be used as part of our Arduino DCC Base Station.
Double-sided PCB with plated through holes, solder mask and silkscreen overlay.
69 x 54mm.
|
|
DCC Power Shield PCB pattern (PDF download) [09207181]
A PDF with the PCB design for the Arduino DCC Base Station/Booster (double-sided).
Both layers are in a single PDF.
|
|
DCC Decoder Programmer PCB pattern (PDF download) [09107181]
PDF with the PCB design for the DCC Programmer (double-sided).
Both layers are in a single PDF.
|
|
Hard-to-get parts for the DCC Power Shield
Two BTN8962TA half-bridge integrated motor driver ICs and one 6N137 opto-coupler, as used in the Arduino DCC project from the January 2020 issue.
The shield PCB is available separately. The rest of the parts can be purchased from just about any electronics retailer.
|