|
MC1310P FM Stereo Demodulator IC (DIP-14)
An MC1310P FM Stereo Demodulator IC in a 14-pin dual inline package.
These are no longer being manufactured; they are new-old stock.
|
|
75cm telescopic FM antenna
750mm fully extended, 167mm minimum length. Seven sections, 7mm diameter, 3mm hole for screw mounting.
Ideal for FM reception. Suitable for the Super-9 Stereo FM Radio.
|
|
BF992 dual-gate depletion-mode Mosfet (SOT-143B)
N-channel dual-gate depletion Mosfets as used in the Super-9 FM Radio.
Two are needed per project.
|
|
Neosid M99-073-96 K3 Assembly pack for Super-9 Stereo FM Radio
One Neosid M99-073-96 K3 Assembly comprising:
M76-403-95 K Former
M76-404-95 K Can
M76-409-95 K3 Cup Core
M76-410-95 K3 Screw Core
Two are required to build the Super-9 Stereo FM Radio.
|
|
CA3089E FM IF amplifier and demodulator IC (DIP-16)
An FM amplifier/limiter/demodulator chip, as used in the Super-9 Stereo FM Radio.
|
|
Super-9 Stereo FM Radio PCB set
A set which includes all the PCBs needed to build a Super-9 FM Radio:
- main board [06109181], black solder mask, 313 x 142mm
- IF alignment board [06109182], 52 x 30mm
- two shield boards [06109183], 13 x 36mm
- antenna attachment board [06109184], 8 x 27mm
- potentiometer range adjustment board [06109185], 27 x 20mm
We also sell some of the hard-to-get parts and the laser-cut case pieces (including dial) separately. See the related items link below for more details.
|
|
Super-9 FM Radio PCB pattern (PDF download) [06109181]
A PDF with the PCB design for the Super-9 Stereo FM Radio (double-sided).
Both layers are in a single PDF.
All the extra, small PCB patterns including the IF Alignment Oscillator, shields, antenna holder and pot travel stopper are included inside the speaker hole cut-out in the main PCB.
|
|
Super-9 FM Radio case laser cutting artwork (PDF download)
The case laser cutting details for the Super-9 Stereo FM Radio's custom case.
|
|
Case pieces for the Super-9 Stereo FM Radio
A set of seven laser-cut 3mm acrylic case pieces for the Super-9 Stereo FM Radio.
The set includes the front, top, bottom and side panels in gloss black and the transparent rear panel and handspan dial.
The hardware to hold them together is not included. See the article in the December 2019 issue for assembly instructions.
|