|
DCC Decoder Programmer sketches
The two sketches required for our DCC Decoder Programmer, including the open-source DCC++ sketch and our own serial-based programmer code.
The download also includes the TimerOne library which is required to compile our sketch.
|
|
Small 2A boost step-up regulator module (MT3608)
A 36x17mm module which uses the MT3608 boost regulator IC. Input is 2-24V, output is 5-28V at up to 2A continuous.
Efficiency up to 93%, switching frequency 1.2MHz. Output voltage is adjusted using a multi-turn trimpot. The input and output DC connections are made via pads in the corner of the PCB.
|
|
DCC Decoder Programmer PCB [09107181]
The PCB for the DCC Programmer project. Can also be used as part of our Arduino DCC Base Station.
Double-sided PCB with plated through holes, solder mask and silkscreen overlay.
69 x 54mm.
|
|
DCC Decoder Programmer PCB plus stackable headers [09107181]
The PCB for the DCC Programmer project, plus a set of four stackable Arduino headers to suit.
Double-sided PCB with plated through holes, solder mask and silkscreen overlay.
69 x 54mm.
|
|
DCC Decoder Programmer PCB pattern (PDF download) [09107181]
PDF with the PCB design for the DCC Programmer (double-sided).
Both layers are in a single PDF.
|