|
Firmware (HEX) files and C source code for the Rudder Position Indicator [2010711A/B]
Microcontroller firmware and C source code for the Rudder Position Indicator project.
There are two sets of Atmel ATtiny861 firmware, one for the sensor/transmitter and one for the receiver/display. Each ZIP contains both sets of files. One zip contains the two HEX files and the other, the C source code for both micros. The firmware files are coded 2010711A (sensor/transmitter) and 2010711B (receiver/display).
|
|
Rudder Position Indicator PCB Set [20107111/2/3/4]
Set of 4 PCBs for the Rudder Position Indicator for Power Boats.
PCBs with plated through holes, solder mask and silkscreen overlay (single-sided designs with links replaced by top layer tracks).
98.5 x 68mm each.
|
|
ATtiny861 programmed for the Rudder Position Indicator Sensor/Transmitter [2010711A.HEX]
ATTiny861 8-bit Microcontroller programmed for the Rudder Position Indicator [2010711A.HEX].
This is for the transmitter; the receiver unit uses a differently programmed microcontroller.
|
|
ATtiny861 programmed for the Rudder Position Indicator Receiver/Display [2010711B.HEX]
ATTiny861 8-bit Microcontroller programmed for the Rudder Position Indicator [2010711B.HEX].
This is for the receiver/display unit; the transmitter unit uses a differently programmed microcontroller.
|
|
Rudder Position Indictor PCB patterns (PDF download) [20107111/2/3/4]
PDFs with the four PCB designs for the Rudder Position Indicator project (all single-sided).
|