|
Passive Phono To Line Input Converter PCB [01111161]
PCB for the Inverse RIAA Adaptor.
Double-sided PCB with plated through holes, solder mask and silkscreen overlay. Snaps apart into two separate sections, both of which can be used to build the complete circuit. One uses SMD resistors/capacitors, the other through-hole types.
53.5 x 40.5mm.
|
|
Passive Phono To Line Input Converter PCB pattern (PDF download) [01111161]
PDF with the PCB design for the Inverse RIAA Adaptor.
It's a single-sided design but with a ground plane on the bottom layer. Both layers are in a single PDF.
|
|
Passive Phono To Line Input Converter panel artwork and drilling template (PDF download)
Lid panel artwork for the Phono to Line Input Converter. Can also serve as a drilling template.
Laser cutting files are also supplied as part of this package.
|
|
Matte/Gloss Black UB5 Lid for Passive Phono To Line Input Converter
A lid laser cut from 3mm black acrylic which replaces the lid supplied with a UB5 "Jiffy" box. Attaches with the supplied screws (note: in some cases you may need to use longer self-tapping screws than those supplied with the original box). One side is gloss black, the other side is matte black. You can fit it either way around.
The Phono To Line Input Converter board attaches using a single black, self-tapping screw or an M2 machine screw and nut. Holes are provided for the four RCA sockets along with this mounting screw, and for the four screws to attach the lid to the box.
130.5 x 68.2mm.
|
|
SMD parts for Passive Line to Phono Input Converter
A set of the SMD parts required to build the Inverse RIAA project (Phono Input Converter), as described in the November 2016 issue.
Includes ten 10nF C0G SMD ceramic capacitors and six SMD resistors. The PCB and lid are available separately from our shop (see below) and you will also need to obtain the RCA connectors and box separately (eg, from Jaycar or Altronics).
|