|
MaxiMite Firmware v4.1, documentation, libraries, sample software, serial port driver and sprint/font editor
Version 4.1. See descriptions of individual files below.
|
|
CP2102-based USB/TTL serial converter with 5-pin header and 30cm jumper cable
A small USB/serial converter module which plugs straight into a USB port and provides a standard 5-pin header interface with 5V, 3.3V, GND and TTL (3.3V) serial TX/RX pins. Suitable for direct connection to any of the Maximite or Micromite projects.
Modern operating systems like Windows 10 should not require any drivers to use this device - plug it in and it should be recognised and ready to use straight away.
The 5-way cable supplied has female "Dupont" headers on both ends, which plug into standard pin headers. It can be used to connect the adaptor to a Micromite LCD BackPack.
We have only tested this adaptor in Windows; it should work with Linux and Mac OSX.
|
|
Maximite PCB [06103111]
PCB for the Maximite Microcomputer.
PCB with plated through holes, solder mask and silkscreen overlay.
124 x 69mm.
|
|
PIC32MX695F512H-80I/PT programmed for the Maximite/miniMaximite (V2.7)
Maximite programmed and labelled PIC32 (64 pins) with vivid pin 1 dot, packaged in anti-static plastic tape.
Contains the Maximite V2.7 software. Can be upgraded to the latest version over USB once the unit has been built.
|
|
MaxiMite Microcomputer PCB pattern (PDF download) [06103111]
PDF with the PCB design for the MaxiMite Microcomputer (double-sided).
The two sides (top & bottom) are shown separately. Note that there are numerous vias between the two layers.
|