Components - Silicon Chip Shop - Silicon Chip Online

DS3231-based Real Time Clock & Calendar module with mounting hardware and rechargeable cell

A DS3231-based RTCC module with onboard I²C pull-up resistors and pin header interface. Included in the pack are two 10mm M2 Nylon tapped spacers and four 6mm M2 Nylon machine screws for mounting plus an LIR2032 rechargeable Lithium-ion cell.

Note: as this module has onboard pull-up resistors for the I²C bus, you may need to remove them, or avoid fitting pull-up resistors on the master, for it to share a bus with other peripherals.

Cat No SC3519. Price: AUD $7.50 ¹		Add to trolley
In stock: yes (20 available). Estimated dispatch time: up to 3 days
Related to: Project: Touchscreen Super Clock (July 2016) Project: Touchscreen-Controlled Energy Meter, Pt.1 (August 2016) Project: Micromite Plus Explore 100 With Touchscreen, Pt.1 (September 2016) Project: Touchscreen Appliance Energy Meter, Pt.2 (September 2016) Feature: El Cheapo Modules From Asia - Part 1 (October 2016) Project: Touchscreen Appliance Energy Meter, Pt.3 (October 2016) Project: Micromite Plus Explore 100 Module, Pt.2 (October 2016) Project: An Arduino Data Logger with GPS (August 2017) Project: Arduino Data Logger Part 2 (September 2017) Project: Low cost, Arduino-based 3-Axis Seismograph (April 2018) Project: Super Clock now shows your electricity tariff (July 2018) Circuit Notebook: Touchscreen clock radio using a Micromite BackPack (June 2019)
Other items relevant for this project: Arduino Data Logger shield PCB with stackable headers [21107171] ($5.00) Arduino Data Logger shield PCB ($5.00) Micromite Plus Explore 100 PCB [07109161 RevC] ($20.00) Touchscreen Appliance Energy Meter PCB [04116061 RevI] ($15.00) Micromite LCD BackPack PCB (2.8-inch version) [07102122] ($7.50) Matte Black UB1 Lid for the Touchscreen Appliance Energy Meter ($10.00) Matte/Gloss Black UB3 Lid for 2.8-inch Micromite LCD BackPack ($5.00) Clear UB3 Lid for 2.8-inch Micromite LCD BackPack ($5.00) Gloss Black UB3 Lid for 2.8-inch Micromite LCD BackPack ($4.00) PIC32MX170F256B-50I/SP programmed for the Tariff Super Clock [SuperTariffClock.hex] ($15.00) PIC32MX470F512L-120/PF programmed for the Micromite Plus (v5.04) ($20.00) PIC32MX170F256B-50I/SP programmed for the Micromite-based Touchscreen Energy Meter v1.01 [0411606A.hex] ($15.00) PIC32MX170F256B-50I/SP programmed for the Micromite-based Touchscreen Super Clock [SuperClockFull.hex] ($15.00) Short Form Kit for the Micromite Plus Explore 100 ($69.90) Micromite LCD BackPack kit (programmed for Energy Meter) ($60.00) Micromite LCD BackPack kit (programmed for Super Clock) ($65.00) Micromite LCD BackPack V2 complete kit ($70.00) GY-68 Barometric Pressure/Altitude/Temperature I²C Sensor breakout board ($5.00) Small 2.5A step-down regulator module (LM2596-based) ($4.00) TEA5767 FM receiver module ($3.00) Smaller TEA5767 FM receiver module ($4.00) PAM8610 2x10W Class-D stereo amplifier module ($10.00) CP2102-based USB/TTL serial converter with microUSB socket and 6-pin right-angle header ($5.00) CP2102-based USB/TTL serial converter with microUSB socket and 6-pin right-angle header (clone version) ($3.00) microSD Card Adaptor Module ($2.50) Elecrow 1A/500mA Li-ion/LiPo charger board with USB power pass-through ($15.00) 5V 0.8W 160mA solar panel ($4.00) Elecrow 1A Li-ion/LiPo charger board with USB pass-through ($35.00) DS3231-based Real Time Clock & Calendar module with mounting hardware ($5.00) DS18B20 waterproof digital temperature sensor with ~1m lead ($5.00) MCP120-270GI/TO Supply Supervisor IC (TO-92) ($2.00) ACS718 20A isolated current monitor ($10.00) Blue 3mm LED with diffused lens ($0.25) CP2102-based USB/TTL serial converter with 5-pin header and 30cm jumper cable ($5.00) VK2828U7G5LF TTL GPS/GLONASS/GALILEO module with antenna and cable ($25.00) Firmware (HEX) file and user manual for the Micromite Mk.2 and Micromite Plus (Free) MMBasic code for the Micromite BackPack-based Touchscreen Clock Radio ($3.00) Firmware (HEX) files and BASIC source code for the Micromite-based Tariff Super Clock [v2] ($3.00) Arduino Sketch (.ino) and libraries for the 3-Axis Arduino-based Seismograph ($3.00) Firmware (Arduino sketch) file for the Arduino Data Logger ($3.00) Firmware (HEX) file and BASIC source code for the Micromite-based Touchscreen Appliance Energy Meter [v1.01] ($3.00) Firmware (HEX) file and BASIC source code for the Micromite-based Touchscreen Super Clock [v1] (Free) Arduino Data Logger shield PCB pattern (PDF download) [21107171] ($3.00) Micromite Plus Explore 100 PCB pattern (PDF download) [07109161 RevC] (Free) Touchscreen Appliance Energy Meter PCB pettern (PDF download) [04116061 RevG] ($3.00) Micromite LCD BackPack PCB patterns (PDF download) [07102121/2] (Free) Touchscreen Appliance Energy Meter lid panel artwork (PDF download) ($3.00)

Subscribers receive a discount on this item. Move the pointer over the price for details.
If you are subscriber, log in to apply your discounts. Otherwise, you may subscribe at the same time as you purchase this item to get the discount.
This discount is not cumulative with any other discounts, including volume discounts.

Silicon Chip Shop - Components (search for shop items within this category)