Micromite LCD BackPack kit (programmed for Super Clock)
A kit of all the parts required to build the 2.8-inch version of the MicroMite LCD BackPack. This includes:
PCB
2.8-inch touchscreen with 320x240 pixels
Programmed microcontroller (SuperClockFull.hex) and IC socket
3.3V low-dropout regulator
Capacitors (all ceramic)
10kΩ resistor and 100Ω trimpot
Pin headers (male and female)
Tapped spacers, machine screws and Nylon washers
UB3 lid (3mm laser-cut acrylic)
The PCBs, programmed microcontroller and regulator are also available separately. We can also supply a suitable GPS module although one is not included in this kit.
PLEASE NOTE: the 10µF and 47µF capacitors supplied are non-polarised SMD ceramic types. They have no markings and can be installed either way around. You can tell them apart as the 10µF capacitors are in a pack of two.
Also note: if not using the lid, place the washers under the 10mm screw heads.
yes (18 available). Estimated dispatch time: up to 3 days