|Matte Black UB3 Lid for the Multi Diode Curve Plotter|
A lid laser cut from 3mm black acrylic which replaces the lid supplied with a UB3 "Jiffy" box. The side facing outwards is matte black.
The Diode Curve Plotter assembly is mounted on the rear of the lid using four M3 machine screws, with the touch-screen flush with the top surface. The cut-out is sized to leave minimal clearance around the screen.
120 x 62mm.
Note: for the lid to fit, the LCD pin header solder joints (top side) must be trimmed. Use two M3 washers (or one 1mm thick Nylon washer) as spacers between the TFT PCB and the lid.