|Translucent blue UB3 Lid for 2.8-inch Micromite LCD BackPack|
A lid laser cut from 3mm clear acrylic which replaces the lid supplied with a UB3 "Jiffy" box. Attaches with the supplied screws.
The 2.8-inch Micromite LCD BackPack is mounted on the rear of the lid using four M3 machine screws, with the touch-screen flush with the top surface. The cut-out is sized to leave minimal clearance around the screen. The cut-out and mounting holes are positioned so that the viewable area of the TFT display is centred. This lid can also be used with the Micromite Plus LCD BackPack.
130.5 x 68.2mm.
Note: for the lid to fit, the LCD pin header solder joints (top side) must be trimmed. Use two M3 washers (or one 1mm thick Nylon washer) as spacers between the TFT PCB and the lid.